close-white.png

    The KD 110 system from UGA - wall inserts

    Systematic sealing. The KD 110 system is a tried and tested cable entry with an inside diameter of 110 mm. With minimal installation effort, the KD 110 wall insert seals safely against pressurised water. The system offers numerous connection options and is compatible with other entry systems. Thermal shrink sleeves TM are supplied with the system covers as standard. Optionally, cold shrink sleeves KS are available.

    Our products

    KD 110-SYSTEM – wall inserts

    KD 110-SYSTEM

    Single wall insert KD110-K

    Quick in the wall and money saved: The one-sided connection for system covers or inserts leaves all options open to you. You stay on the safe side with the supplied blind plug, because the packing is already gas-tight and pressurised water-tight after concreting - even without finishing.

    • One-sided connection of system covers or system inserts
    • Quick assembly in waterproof concrete structures (class 1 and 2)
    • Easy bundling possible by plugging together
    watertight
    Gas- and watertight
    up to 2.5 bar
    haken-mit-kreis-icon
    Frauenhofer
    Institut

    Well planned for you from beginning to end: The supplied system cover (blind plug) and the dirt cover for the rear (non-connection side) keep the interior clean during installation. This makes the wall insert gas- and water-pressure-tight from day one. Your wall is thicker than 500 mm? Just get in touch with us!

    Downloads

    KD 110-SYSTEM

    Double wall insert KD110-K2

    Quick in the wall and doubly secured: With 2 connections for system covers or inserts, you have maximum flexibility. You stay on the safe side with the supplied blind plugs, because the packing is already gas- and water-pressure-tight after concreting - even without finishing.

    • Two-sided connection of system covers or system inserts
    • Quick assembly in waterproof concrete structures (class 1 and 2)
    • Easy bundling possible by plugging together
    watertight
    Gas- and watertight
    up to 2.5 bar
    haken-mit-kreis-icon
    Frauenhofer
    Institut
    Well planned for you from beginning to end: The supplied system cover (blind plug) and the dirt cover for the rear (non-connection side) keep the interior clean during installation. This makes the wall insert gas- and water-pressure-tight from day one. Is your wall thicker than 500 mm? Just get in touch with us!

    Downloads

    KD 110-SYSTEM

    Double wall insert for double or element walls KD110-K2-EW

    Due to the additional rubber seal in the middle, this double wall insert is also suitable for double or element walls. With 2 connections for system covers or inserts, you have maximum flexibility. After concreting, the packing is gas- and water-pressure-tight - even without finishing.

    • For double or element walls due to additional sealing rubber
    • Two-sided connection of system covers or system inserts
    • Easy bundling possible by plugging together
    watertight
    Gas- and watertight
    up to 2.5 bar
    haken-mit-kreis-icon
    Frauenhofer
    Institut

    Well planned for you from beginning to end: The supplied system cover (blind plug) and the dirt cover for the rear (non-connection side) keep the interior clean during installation. This makes the wall insert gas- and water-pressure-tight from day one. Is your wall thicker than 500 mm? Just get in touch with us!

    Downloads

    KD 110-SYSTEM

    Single wall insert with collar KD110-K-MA

    Easy elastic tying: You can connect empty conduits or flexible cable conduits with the help of a sleeves. The one-sided connection for system covers or inserts leaves all options open to you. After concreting, the packing is gas- and water-pressure-tight - even without finishing.

    • One-sided connection of system covers or system inserts
    • Quick assembly in waterproof concrete structures (class 1 and 2)
    • Easy bundling possible by plugging together
    watertight
    Gas- and watertight
    up to 0.5 bar
    haken-mit-kreis-icon
    Frauenhofer
    Institut

    You can fix smooth walled pipes or corrugated pipes in 3 standard sizes with 2 tensioning straps. The supplied dirt cover for the rear (non-connection side) keeps the interior clean during installation. Your wall is thicker than 500 mm? Just get in touch with us!

    Downloads

    KD 110-SYSTEM

    Angular wall insert KD110-K-S

    For every angle of your project: reliably seal angled penetrations at angles of 30°, 45° and 60°. Thanks to the polystyrene wedge and steel frame, fixing for installation is particularly easy. The one-sided connection for system covers or inserts leaves all options open to you. After concreting, the packing is gas- and water-pressure-tight.

    • Angled penetration at 30°, 45° and 60°.
    • One-sided connection of system covers or system inserts
    • Quick assembly in waterproof concrete structures (class 1 and 2)
    watertight
    Gas- and watertight
    up to 2.5 bar
    haken-mit-kreis-icon
    Frauenhofer
    Institut

    Well planned for you from beginning to end: The supplied system cover (blind plug) and the dirt cover for the rear (non-connection side) keep the interior clean during installation. This means that the wall insert and your wall are gas- and water-pressure-tight from day one. Bundling is possible by easy plugging together. Is your wall thicker than 500 mm? Just get in touch with us!

    Downloads

    KD 110-SYSTEM

    Angular wall insert KD110-K2-S

    For every angle of your project: Double seal angled penetrations at 30°, 45° and 60°. Thanks to the polystyrene wedge and steel frame, fixing for installation is particularly easy. With 2 connections for system covers or KSS systems, you have maximum flexibility. After concreting, the packing is gas- and water-pressure-tight.

    • Angled penetration at 30°, 45° and 60°
    • Two-sided connection of system covers or system inserts
    • Quick assembly in waterproof concrete structures (class 1 and 2)
    watertight
    Gas- and watertight
    up to 2.5 bar
    haken-mit-kreis-icon
    Frauenhofer
    Institut

    Well planned for you from beginning to end: The supplied system cover (blind plug) and the dirt cover for the rear (non-connection side) keep the interior clean during installation. This makes the wall insert gas- and water-pressure-tight from day one. Is your wall thicker than 500 mm? Just get in touch with us!

    Downloads

    KD 110-SYSTEM

    Double wall insert KD110-K2-F+L-W(1/2)

    Seal openings in the black trough according to DIN 18533. The fixed and loose flange design is suitable for non-pressing (W1) or pressing water (W2).

    • Two-sided connection of system covers or system inserts
    watertight
    Gas- and watertight
    up to 2.5 bar
    haken-mit-kreis-icon
    Frauenhofer
    Institut

    Tender texts

    Tender texts for your specifications - quick and easy download. We provide you with our product information as tender specifications. Via Ausschreiben.de you will find over 1 million tender specifications from over 550 manufacturers.

    Assembly instructions

    Installation instructions for concreting wall inserts.

    Montageanleitung_positiv-png

    Customized solutions

    We are by your side!

    Often, pragmatic solutions are required on construction sites to make cables and pipelines gas- and water-tight. Where standard solutions no longer suffice, UGA supplies suitable customized solutions.

    Benefit from our many years of experience, unique service and fast delivery times. We accompany you in your project from planning to implementation.

    CONTACT

    We are happy to assist you!

    Do you have questions about the product or would you like personal advice? Please use our contact form. We will get back to you as soon as possible.

    Our contact

    UGA SYSTEM-TECHNIK GMBH & CO. KG

    Heidenheimer Str. 80-82
    89542 Herbrechtingen
    Deutschland