Quick to install and saves you money: The one-sided connection for system covers or inserts leaves all options open to you. You are on the safe side with the blind plug supplied, as the wall insert is leaktight against gas and pressing water immediately after concreting – even without reworking.

• One-sided mounting of system covers or system inserts
• Quick installation in waterproof concrete structures (class 1 and 2)
• Simple bundle possible by plugging together
• Cost-effective variant

Quick to install and doubly secured: With 2 connections for system covers or inserts, you have maximum flexibility. You stay on the safe side with the blind plugs supplied, as the wall insert is leak-tight against gas and pressing water immediately after concreting – even without reworking.

• System covers or system inserts can be fitted on both sides
• Quick installation in waterproof concrete structures (class 1 and 2)
• Simple bundle possible by plugging together

Thanks to the additional rubber seal in the centre, this double wall insert is also suitable for double or element walls. With 2 connections for system covers or inserts, you have maximum flexibility. After concreting, the wall insert is leak-tight against gas and pressing water - even without reworking.

• For double or panelled walls thanks to additional sealing rubber
• System covers or system inserts can be fitted on both sides
• Bundle possible by plugging together

You simply plug the mounting flange into a core drilling or wall opening up to a maximum diameter of 150 mm. Depending on your budget, you can choose fastenings made of stainless steel (V4A) or in a cheaper galvanised version.

• Subsequent dowelling to core drillings up to 150 mm
• One-sided mounting of system covers or system inserts
• Quick installation in waterproof concrete structures (class 1 and 2)

For every angle of your project: Reliably seal sloping penetrations at angles of 30°, 45° and 60°. Thanks to the polystyrene wedge and steel frame, fixing for installation is particularly easy. The one-sided
connection for system covers or inserts leaves all options open to you. After concreting, the wall insert is leak-tight against gas and pressing water.

• Safe installation of rigid, large cables/pipes
• Inclined penetration at angles of 30°, 45° and 60°
• One-sided mounting of system covers or system inserts
• Quick to install in waterproof concrete structures (class 1 and 2)

For every angle of your project: Double-seal sloping penetrations at an angle of 30°, 45° and 60°.
Thanks to the polystyrene wedge and steel frame, fixing for installation is particularly easy. With 2 connections for system covers or KSS systems, you have maximum flexibility. After concreting, the wall insert is leak-tight against gas and pressing water.

• Safe installation of rigid, large cables/pipes
• Inclined penetration at angles of 30°, 45° and 60°
• System covers or system inserts can be fitted on both sides
• Quick to install in waterproof concrete structures (class 1 and 2)

Simple elastic connection: Use a sleeve to connect empty conduits or flexible cable protection conduits. The one-sided connection for system covers or inserts leaves all options open to you. After concreting, the wall insert is leak-tight against gas and pressing water – even without reworking.

• One-sided mounting of system covers or system inserts
• Quick installation in waterproof concrete structures (class 1 and 2)
• Simple bundle possible by plugging together

Connected in no time at all: You can connect smooth-walled cable protection conduits using a pipe fitting. The one-sided connection for system covers or inserts leaves all options open to you. After concreting, the wall insert is leak-tight against gas and pressing water.

• One-sided mounting of system covers or system inserts
• Quick installation in waterproof concrete structures (class 1 and 2)
• Simple bundle possible by plugging together

Flexible connection at any angle: Use a sleeve to connect empty conduits or flexible cable protection conduits to angled penetrations. The one-sided connection for system covers or inserts leaves all options open to you. After concreting, the wall insert is leak-tight against gas and pressing water.

• Safe installation of rigid, large cables/pipes
• Inclined penetration at angles of 30°, 45° and 60°
• One-sided mounting of system covers or system inserts
• 2 high-quality tensioning straps for secure fastening

Suitable for sealing in the black trough (DIN 18533): The 50 mm wide, all-round PVC adhesive flange is suitable for
liquid sealants and non-pressing (W1) or moderately pressing water (W2.1-E). With 2 connections for system covers or KSS systems, you have maximum flexibility.

• For black troughs with liquid applied sealants in accordance with
  DIN 18533
• System covers or system inserts can be fitted on both sides
• Customised arrangement of the wall insert before production

The mounting flange with integrated fixed/loose flange construction can be subsequently anchored to a core drilling or wall opening – ideal for your renovation project. The waterproofing membrane can then be professionally re-adjusted. The fixed and loose flange construction can be designed for both non-pressing water (W1) and pressing water (W2).

• Subsequent dowelling in the black trough
• One-sided connection of system covers or system inserts
• 10 mm rubber flange gasket

Suitable for waterproofing in black troughs (DIN 18533): The circumferential fixed and loose flange design is suitable for sheet-type waterproofing. With 2 connections for system covers or inserts, you have maximum flexibility. You are on the safe side with the blind plugs supplied, as the wall insert is leak-tight against gas and pressing water immediately after concreting – even without reworking.

• Available for all black trough load cases in accordance with
  DIN 18533
• System covers or system inserts can be fitted on both sides
• Customised arrangement of the wall insert before production